304 SS Feed Pellet Production Machine High Strength Precision Gear
Drive
Features of Ring Die Feed Pellet Production Machine:
America CPM Model feed pellet production machine, high-strength
precision gear drive, transmission efficiency can be as high as
99%. The normal belt transmission efficiency of 90% -95%, and easy
to slip loose, life is short, when the belt becomes loose,
transmission efficiency will drop a lot, in normal with the same
power, gear drive Pellet machine output should be increased by 20%
-30% than the belt drive.
Advantages of Ring Die Feed Pellet Production Machine:
1. Host bearings generally use the top ten brands in the world of
NSK (Japan), SKF (Switzerland) bearings, reliable quality, long
service life!
2. In.the rear of pellet machine has the protection switch device ,
when the spindle bearing and spindle lock, the power can be cut off
in time, the spindle has an effective protection effect!
3. Feeder spindle, screw, sleeve, paddle are 304 stainless
steel,bearing is SKF brand,longer life.
4. The gap between paddle and the bottom is less than 4mm, the
material basically no residue, no manual cleaning residue,but other
manufacturers is generally 8-10mm, more material leftovers, If the
labor can not be timely clean-up, material cross-contamination, if
for a long time production is also easy to pests!
5. Conditioner spindle, paddle, bolt ,wall tube are 304 stainless
steel, Conditioner paddle stainless steel castings, bolts fixed
installation, angle adjustable, but other factory is welding, the
angle can not be adjusted. Conditioner can be adjusted by adjusting
the paddle then adjust the material to stay time in conditioner.
This is the welding pad can not do!
6. Pellet machine door with 304 stainless steel, other use ordinary
carbon steel, pellets from the machine high temperature, moisture,
ordinary carbon steel life is generally about six months, and The
service life of stainless steel is long-term!
7.Door cutter with a graduated mark can be more accurate regulation
of the pellet length, the other manufacturers generally do not have
the mark of the cutter!
8. Holder, the ring die, roller high-strength alloy forged pieces,
the CNC machining heat treatment, high precision, high strength and
long service life.
Main Parameters of Ring Die Feed Pellet Production Machine:
Model | SZLH250 | SZLH320 | SZLH350 | SZLH 400 | SZLH 420 | SZLH508 |
Main Motor Power (kw) | 22 | 37 | 55 | 90 | 110 | 160 |
Conditioner Power (kw) | 1.5 | 2.2 | 2.2 | 3 | 5.5 | 7.5 |
Dia of mould (mm) | 250 | 320 | 350 | 400 | 420 | 508 |
Feeder Power (kw) | 0.75 | 1.5 | 1.5 | 1.5 | 1.5 | 2.2 |
Size of Finished pellets (mm) | 1.5-12 | 1.5-12 | 1.5-12 | 1.5-18 | 1.5-18 | 1.5-18 |
Yeild (t/h) for animal feed | 1-2 | 2-4 | 2-6 | 3-8 | 4-12 | 4-18 |
